3M provides high quality stylish protective coveralls offering breathable comfort and protection you can rely on. With the highest level of construction quality, the range provides peace of mind for effective use and protection against many industry hazards.
Protection: 3M Protective Coveralls conform with the relevant European standards. The range has been designed to ensure that the wearer will stay protected and feel safe for a variety of applications.
Comfort: Breathability, softness of fabrics, knitted cuffs, everything has been though of for the wearer's comfort. Very breathable material. For reduced heat stress and comfortable wear.
Elasticated hood, Waist and Ankles for convenience and freedom of movement
Two way zip with resealable flap for extra convenience and protection from contaminants
Knitted cuffs of soft polyester for increased wearer comfort
Reinforced gusset for increased robustness and durability
Anti-static, silicone and latex free
Breathable comfort all day
Colour : Blue
Key Applications:
Food processing
Wood working
Insulation laying
Paint applications
domestic non-hazardous light dust
Height Chest
M
167 - 176 c
92 - 100 cm
L
174 - 181 cm
100 - 108 cm
XL
179 - 187 cm
108 - 115 cm
XXL
186 - 194 cm
115 - 124 cm
Use strictly in accordance with all instructions contained below or on the product packaging.
The 3M 4530 is an EN533:1997 Index 1/0 material is not intended to be used on its own as a fire retardant garment and must be used over an index of 2 or 3 material for flame protection. Please note that the knitted cuffs have not been treated for flame retardant and as such must not come into contact with sparks or flash flames.
The 3M 4530 must not be used in areas where there is a risk of exposure to certain hazardous substances beyond CE type 5/6 certification. While a certain level of limited protection may be afforded against these chemicals, no guarantee can be provided as to the resistance to exposures other than to chemical splashes and hazardous dusts
The 3M 4530 is anti statically treated and offer electrostatic protection according to EN1149-1. All apparel must be suitably grounded for anti static treatment to be effective.
The 3M 4530 must not be used in contact with heavy oils.
The 3M 4530 is made using breathable fabrics. Nethertheless it is important to bear in mind the constraints on use in hot environments and in particular the consequences to the comfort of the wearer.
Please note that the tests carried out on the 3M 4530 are done so under laboratory conditions and may not therefore reflect the reality of use. Other factors may influence these product limitations, such as use in conditions of excessive heat or in environments with high mechanical risks (abrasion, cuts, and tears).
The user is the only judge of the type of protection that is suitable for him to use.
The supplier shall not be held liable for incorrect usage of these garments.
Do not alter or modify this garment
Replace this garment if it is damaged, heavily contaminated or in accordance with local work practice
Contaminated garments should be removed & handled with care.
Contaminated garments should be disposed of in accordance with National regulations.
National regulations may impose specific limitations on the use of garments depending on type.
Use of any 3M garment should be in accordance with applicable safety & health standards and / or national requirements.