3M provides high quality stylish protective coveralls
offering breathable comfort and protection you can rely on. With the highest level
of construction quality, the range provides peace of mind for effective use and
protection against many industry hazards.
Protection:
3M Protective Coveralls conform with the relevant European standards. The range
has been designed to ensure that the wearer will stay protected and feel safe for
a variety of applications.
Comfort:
Breathability, softness of fabrics, knitted cuffs, everything has been thought of
for the wearer's comfort. Very breathable material. For reduced heat stress and
comfortable wear.
Elasticated hood, Waist and Ankles for convenience
and freedom of movement
Two way zip with resealable flap for extra convenience
and protection from contaminants
Knitted cuffs of soft polyester for increased
wearer comfort
With gusset for extra freedom of movement
Does not contain components made from natural
rubber latex or silicone
Breathable comfort all day
Colour : Blue
Key Applications:
Food processing
Wood working
Insulation laying
Asbestos handling
domestic non-hazardous light dust
Height
Chest
M
167 - 176 c
92 - 100 cm
L
174 - 181 cm
100 - 108 cm
XL
179 - 187 cm
108 - 115 cm
XXL
186 - 194 cm
115 - 124 cm
Use strictly in accordance with all instructions
contained below or on the product packaging.
The 3M 4530 is an EN533:1997 Index
1/0 material is not intended to be used on its own as a fire retardant
garment and must be used over an index of 2 or 3 material for flame
protection. Please note that the knitted cuffs have not been treated
for flame retardant and as such must not come into contact with sparks
or flash flames.
The 3M 4530 must not be used in areas
where there is a risk of exposure to certain hazardous substances beyond
CE type 5/6 certification. While a certain level of limited protection
may be afforded against these chemicals, no guarantee can be provided
as to the resistance to exposures other than to chemical splashes and
hazardous dusts
The 3M 4530 is anti statically treated
and offer electrostatic protection according to EN1149-1. All apparel
must be suitably grounded for anti static treatment to be effective.
The 3M 4530 must not be used in contact
with heavy oils.
The 3M 4530 is made using breathable
fabrics. Nethertheless it is important to bear in mind the constraints
on use in hot environments and in particular the consequences to the
comfort of the wearer.
Please note that the tests carried
out on the 3M 4530 are done so under laboratory conditions and may not
therefore reflect the reality of use. Other factors may influence these
product limitations, such as use in conditions of excessive heat or
in environments with high mechanical risks (abrasion, cuts, and tears).
The user is the only judge of the
type of protection that is suitable for him to use.
The supplier shall not be held liable
for incorrect usage of these garments.
Do not alter or modify this garment
Replace this garment if it is damaged,
heavily contaminated or in accordance with local work practice
Contaminated garments should be removed
& handled with care.
Contaminated garments should be disposed
of in accordance with National regulations.
National regulations may impose specific
limitations on the use of garments depending on type.
Use of any 3M garment should be in
accordance with applicable safety & health standards and / or national
requirements.